Error message and an empty work field - Polyloop

mon_stdnt · 6th March 2006, 04:05

I would like to know what causes Hexagon to give you a "internal error" when saving? Cause when I use hexagon and save it it sometimes gives me "internal error" message, but I always save it again just in case.

I tried to open the file and the same message showed up and with no modelling work(a clear window):o

. Did this ever happen to anyone with this message?

bwtr · 6th March 2006, 04:35

I have had similar things regularly but I just ignore and no problem seems to exist--one of those odd quirks that I presumed maybe a "glitch" rather than a bug in Hexagon.
You obviously cant save a faulty save so how do you explain the point at which the problem occurs? Can you detail the steps involved to the point where it occurs so that others may try to duplicate?

mon_stdnt · 6th March 2006, 05:22

The only thing I did is save it first. Occasionally the message pops-up, but I ignore it and save it again. ( It happen to many a could of time, but never this bad) After I saved it I close the program and shut down the computer. Today I wanted to work on the file little more and the message showed up. I hit valided, but the work I did didn't show.( empty work area)

Piem · 6th March 2006, 08:22

Hi ,Here's your file.

You should follow carrefully tutorials because there is a lot of errors .But we always doing like this the first time .

mon_stdnt · 6th March 2006, 19:19

thank for your help

3DJunkie · 4th April 2006, 04:54

I've had the same problem, usually after an enternal error message. I now use "incremental saving", and the problem has stopped. I've noticed enternal error messages occure most often when I try to save my file while in face, line or point selection mode or if I try to do some kind of invalid action (bridge disimilar items, etc). I make sure everything is unselected now when I save, and I haven't had a blank document open up for about 3 weeks.

DoctorLister · 29th April 2006, 03:55

Just wanted to point out that if you get Hexagon 2, you will now be able to go back to those files that weren't opening/saving properly and Hex2 will open them with most of the geometry preserved. I had a few faces deleted and a few faces drawn which should not have been there, but those were easily fixed and I was able to save a lot of work I thought was lost.

mon_stdnt · 29th April 2006, 04:33

thanx
call me crazy

, but i'm waiting until C6P and Hex2 are in a bundle package

Piem · 29th April 2006, 11:50

Then you'll wait for what. ??

Enjoy your life right NOW

29th April 2006, 04:33	#8 (permalink)
mon_stdnt Always learning Join Date: Jan 2006 Location: New York Posts: 447	thanx call me crazy , but i'm waiting until C6P and Hex2 are in a bundle package __________________ www.rgamarra.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

6th March 2006, 04:35	#2 (permalink)
bwtr Brian Join Date: Jul 2005 Location: South Australia Posts: 2,097	I have had similar things regularly but I just ignore and no problem seems to exist--one of those odd quirks that I presumed maybe a "glitch" rather than a bug in Hexagon. You obviously cant save a faulty save so how do you explain the point at which the problem occurs? Can you detail the steps involved to the point where it occurs so that others may try to duplicate?

6th March 2006, 05:22	#3 (permalink)
mon_stdnt Always learning Join Date: Jan 2006 Location: New York Posts: 447	The only thing I did is save it first. Occasionally the message pops-up, but I ignore it and save it again. ( It happen to many a could of time, but never this bad) After I saved it I close the program and shut down the computer. Today I wanted to work on the file little more and the message showed up. I hit valided, but the work I did didn't show.( empty work area)

6th March 2006, 19:19	#5 (permalink)
mon_stdnt Always learning Join Date: Jan 2006 Location: New York Posts: 447	thank for your help

4th April 2006, 04:54	#6 (permalink)
3DJunkie Vertex Join Date: Mar 2006 Location: Southern California Posts: 9	I've had the same problem, usually after an enternal error message. I now use "incremental saving", and the problem has stopped. I've noticed enternal error messages occure most often when I try to save my file while in face, line or point selection mode or if I try to do some kind of invalid action (bridge disimilar items, etc). I make sure everything is unselected now when I save, and I haven't had a blank document open up for about 3 weeks.

29th April 2006, 03:55	#7 (permalink)
DoctorLister Spline Join Date: Nov 2005 Posts: 36	Just wanted to point out that if you get Hexagon 2, you will now be able to go back to those files that weren't opening/saving properly and Hex2 will open them with most of the geometry preserved. I had a few faces deleted and a few faces drawn which should not have been there, but those were easily fixed and I was able to save a lot of work I thought was lost.

29th April 2006, 11:50	#9 (permalink)
Piem Booh! Join Date: May 2003 Location: Rennes/fr Posts: 6,644	Then you'll wait for what. ?? Enjoy your life right NOW