[Hex 1.2] Video: modelling a water mineral bottle - Polyloop

Thomas · 29th October 2005, 10:14

Maxime, one of the Hexagon developper, has made a 12 min video tutorial, which show how to model a water bottle with Hexagon 1.2 and its new selection tools and Symmetry.

No audio is avialable in this tutorial, but in the first part of the video, no shortcuts are used, but after, tools like selection loops/rings are used with their shortcuts.

The only feature unavailable from a shorcut, is the extended selection, which is available from draging your mouse while CTRL key is press.

Watch the video (39Mb, quicktime)

Yoshihisa · 8th November 2005, 15:56

Incredibly nice tutorial !

Corndog · 3rd January 2006, 01:18

I am trying to duplicate the procedure used for making the bottle top threads... Everything is fine until it is time to flatten the top and bottom of the helix after the two welds.. When I select the edge and loop the selection my x,y,z tool is not aligned any more to the axis anymore therefore when I tray and flatten the edges it rotates.. i will post a pic as I now realize this description is confusing me LOL I Will post pic in a few seconds..

EDIT I just realized I posted this under the tutorial... If I should not have could a mod please move it... Sorry

Grendel · 3rd January 2006, 05:52

Change your manipulator mode from selection to world.

Corndog · 3rd January 2006, 06:35

Well Grendel.. I remember reading that now but..there is just so much I am a bit overwhelmed.... So If I pay you $5 for every question you answer of mine I think I owe about 50 now..Thanks again for sharing your knowledge

Just completed that .. what a great way to make threads..easiest I have seen
Great work

edcorusa · 14th September 2006, 20:13

I wish to thank Thomas for the tut. I did it a time back and really enjoyed it. I modified the bottle a little and added a label. I rendered it in Carrara 5 Pro.

Sketchy · 16th September 2006, 00:22

Quote:

Originally Posted by edcorusa

I wish to thank Thomas for the tut. I did it a time back and really enjoyed it. I modified the bottle a little and added a label. I rendered it in Carrara 5 Pro.

Nice rendering. Looks like the real thing. I've never been able to render transparent objects as real as that looks.

Btw, the background seems too bright and it washes up the well-rendered bottles. Or it may be my monitor's gamma.

Thomas · 16th September 2006, 09:51

No need to thanks me. I' the poster of the original message, but it's Maxime tutorial, one of the Hexagon and Amapi developper

hikmayan · 4th November 2007, 08:52

Thanks for sharing the tutorial man.I wish I can find more tutorials on Hexagon.One of the reasons I decided to go ahead and register as a full member....you?...learn new stuff about this fantastic tool.So,any video links please post.The first time I try Hex,I felt the potentials and less junk functionalitie....just straight up modeler,painter,.....etc.

I am glad to be here guys...and looking forward to get loaded up with new ideas creating w/this tool

Thomas · 18th November 2007, 12:18

Hikmayan: You are in the good section, you can fnd others Hexagon tutorials here!

Duke_of_vampires · 8th December 2008, 21:08

hi Thomas
i founded out that there is another tool panel in that video (that is opened at the beginning just under the main tool panel) is it only 1.2 version future?

Thomas · 9th December 2008, 12:13

Yes, only in 1.0/1.01/1.2/1.21... all the features in this panel are still inHexagon, but splited in other tools, submenus, etc.

29th October 2005, 10:14	#1 (permalink)
Thomas Always learning new stuff Join Date: Jul 2002 Location: Merignac, France Posts: 11,728	[Hex 1.2] Video: modelling a water mineral bottle Maxime, one of the Hexagon developper, has made a 12 min video tutorial, which show how to model a water bottle with Hexagon 1.2 and its new selection tools and Symmetry. No audio is avialable in this tutorial, but in the first part of the video, no shortcuts are used, but after, tools like selection loops/rings are used with their shortcuts. The only feature unavailable from a shorcut, is the extended selection, which is available from draging your mouse while CTRL key is press. Watch the video (39Mb, quicktime) Attached Images __________________ Polyloop owner & Administrator - no support by PM or email. Polysculpt [EN/FR] - my personal blog about my 3D work Polyloop [EN/FR] - Meuuh [FR +16 ans] - Lecaramel.fr [FR - Hélico RC] - Pixologic [JOB] - Le ZBlog [JOB] Follow me on Twitter! Last edited by Thomas; 24th July 2006 at 18:36.

8th November 2005, 15:56	#2 (permalink)
Yoshihisa Vertex Join Date: Aug 2005 Location: Japan Posts: 10	Incredibly nice tutorial ! __________________ Yoshihisa Inoi uribo@jungle.or.jp

3rd January 2006, 01:18	#3 (permalink)
Corndog Edge modeling Join Date: Dec 2005 Location: Ontario, Canada Posts: 384	I am trying to duplicate the procedure used for making the bottle top threads... Everything is fine until it is time to flatten the top and bottom of the helix after the two welds.. When I select the edge and loop the selection my x,y,z tool is not aligned any more to the axis anymore therefore when I tray and flatten the edges it rotates.. i will post a pic as I now realize this description is confusing me LOL I Will post pic in a few seconds.. EDIT I just realized I posted this under the tutorial... If I should not have could a mod please move it... Sorry Attached Thumbnails __________________ daz3d forums blow chunks

3rd January 2006, 05:52	#4 (permalink)
Grendel Moderator Join Date: Jul 2005 Location: Houston, Texas Posts: 1,277	Change your manipulator mode from selection to world. Attached Thumbnails

3rd January 2006, 06:35	#5 (permalink)
Corndog Edge modeling Join Date: Dec 2005 Location: Ontario, Canada Posts: 384	Well Grendel.. I remember reading that now but..there is just so much I am a bit overwhelmed.... So If I pay you $5 for every question you answer of mine I think I owe about 50 now..Thanks again for sharing your knowledge Just completed that .. what a great way to make threads..easiest I have seen Great work __________________ daz3d forums blow chunks

14th September 2006, 20:13	#6 (permalink)
edcorusa Vertex Join Date: Sep 2005 Location: Carlsbad, NM USA Posts: 18	Thanks. I wish to thank Thomas for the tut. I did it a time back and really enjoyed it. I modified the bottle a little and added a label. I rendered it in Carrara 5 Pro. Attached Thumbnails __________________ ------------- Brian Weston edcorusa edcorusa.cgsociety.org

16th September 2006, 09:51	#8 (permalink)
Thomas Always learning new stuff Join Date: Jul 2002 Location: Merignac, France Posts: 11,728	No need to thanks me. I' the poster of the original message, but it's Maxime tutorial, one of the Hexagon and Amapi developper __________________ Polyloop owner & Administrator - no support by PM or email. Polysculpt [EN/FR] - my personal blog about my 3D work Polyloop [EN/FR] - Meuuh [FR +16 ans] - Lecaramel.fr [FR - Hélico RC] - Pixologic [JOB] - Le ZBlog [JOB] Follow me on Twitter!

4th November 2007, 08:52	#9 (permalink)
hikmayan Vertex Join Date: Nov 2007 Posts: 7	Thanks for sharing the tutorial man.I wish I can find more tutorials on Hexagon.One of the reasons I decided to go ahead and register as a full member....you?...learn new stuff about this fantastic tool.So,any video links please post.The first time I try Hex,I felt the potentials and less junk functionalitie....just straight up modeler,painter,.....etc. I am glad to be here guys...and looking forward to get loaded up with new ideas creating w/this tool

18th November 2007, 12:18	#10 (permalink)
Thomas Always learning new stuff Join Date: Jul 2002 Location: Merignac, France Posts: 11,728	Hikmayan: You are in the good section, you can fnd others Hexagon tutorials here! __________________ Polyloop owner & Administrator - no support by PM or email. Polysculpt [EN/FR] - my personal blog about my 3D work Polyloop [EN/FR] - Meuuh [FR +16 ans] - Lecaramel.fr [FR - Hélico RC] - Pixologic [JOB] - Le ZBlog [JOB] Follow me on Twitter!

8th December 2008, 21:08	#11 (permalink)
Duke_of_vampires CG-Otaku Join Date: Jan 2006 Location: Russian from Finland Posts: 414	hi Thomas i founded out that there is another tool panel in that video (that is opened at the beginning just under the main tool panel) is it only 1.2 version future? __________________ KaWaIi!! ^___^

9th December 2008, 12:13	#12 (permalink)
Thomas Always learning new stuff Join Date: Jul 2002 Location: Merignac, France Posts: 11,728	Yes, only in 1.0/1.01/1.2/1.21... all the features in this panel are still inHexagon, but splited in other tools, submenus, etc. __________________ Polyloop owner & Administrator - no support by PM or email. Polysculpt [EN/FR] - my personal blog about my 3D work Polyloop [EN/FR] - Meuuh [FR +16 ans] - Lecaramel.fr [FR - Hélico RC] - Pixologic [JOB] - Le ZBlog [JOB] Follow me on Twitter!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode