[LES GAULOIS] Jules César - Polyloop

icedeyes · 19th May 2006, 21:00

As suggested I creat a new thread for my WIP... It will go quite slow because i have extremelly many stuff to do for my job right now... here is what i got so far...

Comments and critique more than welcome

dalboris · 19th May 2006, 21:42

nice work man !

Piem · 19th May 2006, 22:02

Nice

!
It looks like .Cesar indeed
The only thing I want to ask is..why do you use symetrical clones instead of an unify mesh ?
just my curiousity :rolleyes:

dalboris · 19th May 2006, 22:45

hum... maybe because I work like that too...

there is too much tools which don't work on the "symétry mode".... and i'm never sure that the other side is correct... I have a feel of "instability"... I'm never sure what the soft do in symetry mode.

with the clone, I'm sure all is ok. I feel better when I model on "clone mode" than on "symetry mode"

But for simple objects, I prefer Symetry mode. It's just for long modeling or complex modeling that I use the "clone mode"

loloallo · 19th May 2006, 23:46

Realy nice !
I 'm waiting for the hairs....

icedeyes · 20th May 2006, 12:38

Thank you for your replies...

I use clone because when you model on a sideview, you can switch one part off and work without the burden of the other half... Also, I use XSI, Maya and Lightwave and since their symmerty modes do not work as well as hexagon's, i am more used to this than other techniques... Finally, as dalboris stated, i found out that while, most of the times, most of the tools work fine in symmetry, there are cases when a testelation operation wont get passed on to the otherside of the model, thus causing more work to be done lateron...

For the hair, i plan to use the diplacemnt tools mostly because it will be a great test but before i get to that, i want to finish his body too..

icedeyes · 23rd May 2006, 13:25

And this is how he looks so far.... Hope yoou like it... the cloth need some serious work yet... used the ambient occlusion shader... I will start unsymmetrizing when the model is complete...

Comments and critique more than welcome....

icedeyes · 27th May 2006, 15:23

This post contains a nude and a clothed ceasar model... hope you like it...

Any further comments are welcome...

Piem · 27th May 2006, 15:24

Great great great

(we do not care about nudity..if it's not porno) and it's not porn at all
Great great

icedeyes · 1st June 2006, 18:34

Thanks for your comments piem... hope you like the update...

ph'ink · 2nd June 2006, 10:17

Hey ! Great work ! it seems to me however that his bust is too broad and his cape flies a little bit... But, it's a nice model ! Bravo !

Olivier · 2nd June 2006, 12:35

Very nice model !
Ave Caesar, te salutant !

keys13 · 2nd June 2006, 12:36

Yes, very nice

pareil que ph'ink sauf que j'ai rien compris à ce qu'il a écrit ^^

ph'ink · 2nd June 2006, 12:56

Lol Keys ! Remarque, le contraire m'eût étonné !

Si quelqu'un avait la gentillesse de remettre les mots dans le bon format pour que icedeyes comprenne...

Icedeyes > Excuse, it's cos my english is very fun !!

I've never learn english at school and all I know is a bad imitation of that I've read on internet...

keys13 · 2nd June 2006, 17:32

Quote:

Originally Posted by ph'ink

I've never learn english at school and all I know is a bad imitation of that I've read on internet...

pour moi sa serait plutôt ça :

I've never had a correct english teatcher at school and all I know is a bad imitation of that I've learn with all theirs old lesson...

19th May 2006, 21:00	#1 (permalink)
icedeyes Vertex Join Date: May 2006 Posts: 7	[LES GAULOIS] Jules César As suggested I creat a new thread for my WIP... It will go quite slow because i have extremelly many stuff to do for my job right now... here is what i got so far... Comments and critique more than welcome Attached Thumbnails

19th May 2006, 21:42	#2 (permalink)
dalboris graphiste taupin++ Join Date: Jun 2005 Location: Perpignan - Toulouse - Orléans Posts: 3,880	nice work man ! __________________ @++ Boris mon site (tutoriaux Amapi/Carrara/Hexagon) __________________________ Portable Toshiba Satelitte P200 : Intel Core 2 Duo T2350 ; 1 Go de RAM ; nVidia 7600GS ; Linux Powered : Kubuntu 8.04, Emacs addict, Firefox/Thunderbird, Gimp, Scribus, Blender

19th May 2006, 22:02	#3 (permalink)
Piem Booh! Join Date: May 2003 Location: Rennes/fr Posts: 6,644	Nice ! It looks like .Cesar indeed The only thing I want to ask is..why do you use symetrical clones instead of an unify mesh ? just my curiousity :rolleyes: __________________ - Sheik Yerbouti - Let love the Noise technimesh.com

19th May 2006, 22:45	#4 (permalink)
dalboris graphiste taupin++ Join Date: Jun 2005 Location: Perpignan - Toulouse - Orléans Posts: 3,880	hum... maybe because I work like that too... there is too much tools which don't work on the "symétry mode".... and i'm never sure that the other side is correct... I have a feel of "instability"... I'm never sure what the soft do in symetry mode. with the clone, I'm sure all is ok. I feel better when I model on "clone mode" than on "symetry mode" But for simple objects, I prefer Symetry mode. It's just for long modeling or complex modeling that I use the "clone mode" __________________ @++ Boris mon site (tutoriaux Amapi/Carrara/Hexagon) __________________________ Portable Toshiba Satelitte P200 : Intel Core 2 Duo T2350 ; 1 Go de RAM ; nVidia 7600GS ; Linux Powered : Kubuntu 8.04, Emacs addict, Firefox/Thunderbird, Gimp, Scribus, Blender

19th May 2006, 23:46	#5 (permalink)
loloallo Rêveur à points cardinaux Join Date: Mar 2005 Location: France Posts: 1,458	Realy nice ! I 'm waiting for the hairs.... __________________ Laurent. Core Duo 2 E6600, Ati X1650, 2Go, Win Xp Et un tas de logiciels qui ne font rien sans imagination. Mon site Tout s'arrange toujours, même... mal.

20th May 2006, 12:38	#6 (permalink)
icedeyes Vertex Join Date: May 2006 Posts: 7	Thank you for your replies... I use clone because when you model on a sideview, you can switch one part off and work without the burden of the other half... Also, I use XSI, Maya and Lightwave and since their symmerty modes do not work as well as hexagon's, i am more used to this than other techniques... Finally, as dalboris stated, i found out that while, most of the times, most of the tools work fine in symmetry, there are cases when a testelation operation wont get passed on to the otherside of the model, thus causing more work to be done lateron... For the hair, i plan to use the diplacemnt tools mostly because it will be a great test but before i get to that, i want to finish his body too..

23rd May 2006, 13:25	#7 (permalink)
icedeyes Vertex Join Date: May 2006 Posts: 7	An update.... And this is how he looks so far.... Hope yoou like it... the cloth need some serious work yet... used the ambient occlusion shader... I will start unsymmetrizing when the model is complete... Comments and critique more than welcome.... Attached Thumbnails

27th May 2006, 15:23	#8 (permalink)
icedeyes Vertex Join Date: May 2006 Posts: 7	This post contains a nude and a clothed ceasar model... hope you like it... Any further comments are welcome... Attached Thumbnails

27th May 2006, 15:24	#9 (permalink)
Piem Booh! Join Date: May 2003 Location: Rennes/fr Posts: 6,644	Great great great (we do not care about nudity..if it's not porno) and it's not porn at all Great great __________________ - Sheik Yerbouti - Let love the Noise technimesh.com

1st June 2006, 18:34	#10 (permalink)
icedeyes Vertex Join Date: May 2006 Posts: 7	update Thanks for your comments piem... hope you like the update... Attached Thumbnails

2nd June 2006, 10:17	#11 (permalink)
ph'ink Jurassik Moderaptor Join Date: Jun 2005 Location: Région des Lacs - Jura français Posts: 4,647	Hey ! Great work ! it seems to me however that his bust is too broad and his cape flies a little bit... But, it's a nice model ! Bravo ! __________________ Lazy, you just stay in bed, you don't want no money, you don't want no bread

2nd June 2006, 12:35	#12 (permalink)
Olivier Moderator Join Date: May 2003 Location: Grenoble Posts: 1,875	Very nice model ! Ave Caesar, te salutant ! __________________ www.3dmodelisation.com

2nd June 2006, 12:36	#13 (permalink)
keys13 Luc Artworker Join Date: Oct 2005 Location: Sud Posts: 269	Yes, very nice pareil que ph'ink sauf que j'ai rien compris à ce qu'il a écrit ^^ __________________ 2D - 3D - Animation - Photo www.keys-artworks.com Bryce 5 - Hexagon 1.2 - Carrara 5 - Vegas 6 - Toshop 7

2nd June 2006, 12:56	#14 (permalink)
ph'ink Jurassik Moderaptor Join Date: Jun 2005 Location: Région des Lacs - Jura français Posts: 4,647	Lol Keys ! Remarque, le contraire m'eût étonné ! Si quelqu'un avait la gentillesse de remettre les mots dans le bon format pour que icedeyes comprenne... Icedeyes > Excuse, it's cos my english is very fun !! I've never learn english at school and all I know is a bad imitation of that I've read on internet... __________________ Lazy, you just stay in bed, you don't want no money, you don't want no bread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode