4 Way Speaker - Polyloop

ELAiko · 10th June 2008, 09:14

My first technical modeling.
Thanks for comments and ... perhaps some tips etc. :-)

Piem · 10th June 2008, 09:29

Hi welcome

yes, it's possible that you need do make more "hard edging", especialy for the screws who seem to be too softened
Also, wire display si quite welcome over here as long as it's a wip.

-ash- · 10th June 2008, 13:37

Welcome to polyloop

Yes please, turn on the wires so we can see how the model is built. Can't really see too much from your screen grab.

ELAiko · 10th June 2008, 16:32

another preview..

-ash- · 10th June 2008, 20:29

Quote:

Originally Posted by ELAiko

another preview..

Cheers - is it going in a cabinet?

Grendel · 10th June 2008, 22:07

You seem to have allot of extra geometry on the top left square speaker around the center that has an odd pattern. Are you using smoothing or not, if so then your larger speaker has extra points to make it circular, if smoothing is not used then it's fine.

10th June 2008, 09:14	#1 (permalink)
ELAiko Vertex Join Date: Jun 2008 Posts: 4	4 Way Speaker My first technical modeling. Thanks for comments and ... perhaps some tips etc. :-) Attached Thumbnails

10th June 2008, 13:37	#3 (permalink)
-ash- I'm Batman (in 3D) Join Date: Jul 2005 Location: Over the road, round the corner, out of the noise. (Scotland) Posts: 725 Images: 9	Welcome to polyloop Yes please, turn on the wires so we can see how the model is built. Can't really see too much from your screen grab. __________________ Regards Tony

10th June 2008, 16:32	#4 (permalink)
ELAiko Vertex Join Date: Jun 2008 Posts: 4	another preview.. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10th June 2008, 09:29	#2 (permalink)
Piem Booh! Join Date: May 2003 Location: Rennes/fr Posts: 6,586	Hi welcome yes, it's possible that you need do make more "hard edging", especialy for the screws who seem to be too softened Also, wire display si quite welcome over here as long as it's a wip.

10th June 2008, 22:07	#6 (permalink)
Grendel Moderator Join Date: Jul 2005 Location: Houston, Texas Posts: 1,224 Images: 23	You seem to have allot of extra geometry on the top left square speaker around the center that has an odd pattern. Are you using smoothing or not, if so then your larger speaker has extra points to make it circular, if smoothing is not used then it's fine.